Thursday, 22 September 2011

Cooling System - Mark 3

When previously installing the Tiger alloy radiator I re-used the 'puller' fan that I had bought for the Polo radiator.  This meant that the radiator could not be angled back fully all the way to the upper horizontal chassis rail.  Now that I'm able to trial fit the nose cone I can see that the top of the radiator is not low enough.  Time to replace the 'puller' type fan with a 'pusher' type.

With the radiator angled all the way back to the chassis rail the nose cone now fits properly.

The water rail was attached to the side chassis rail.  A dab of Sikaflex and a rivet at each end have made a strong mounting.

No comments:

Post a Comment