The front brake pipes will be cut to length once the exact position of the braided flexi hoses is established. After cutting the ends will need re-flaring with the appropriate tool.
Saturday 16 October 2010
Brake pipes fitted
Front and rear brake pipes fitted using 'p-clips' and rivets. Brake light switch and brake fluid reservoir also fitted to master cylinder. Bleed screw to be added to upper front hole later. The rear brake pipe is connected to the master cylinder via a compensator, which reduces the braking effort on the back wheels.
The front brake pipes will be cut to length once the exact position of the braided flexi hoses is established. After cutting the ends will need re-flaring with the appropriate tool.
The front brake pipes will be cut to length once the exact position of the braided flexi hoses is established. After cutting the ends will need re-flaring with the appropriate tool.
Looks good, keep up the good work. if u need any pointers you can find my email address at my blog - www.jamstigeravon.blogspot.com
ReplyDelete